HMS Odin (S10)

1

HMS Odin was a British Oberon-class submarine submarine operated by the Royal Navy.

Design and construction

The Oberon class was a direct follow on of the Porpoise-class, with the same dimensions and external design, but updates to equipment and internal fittings, and a higher grade of steel used for fabrication of the pressure hull. As designed for British service, the Oberon-class submarines were 241 ft in length between perpendiculars and 295.2 ft in length overall, with a beam of 26.5 ft, and a draught of 18 ft. Displacement was 1,610 tons standard, 2,030 tons full load when surfaced, and 2,410 tons full load when submerged. Propulsion machinery consisted of 2 Admiralty Standard Range 16 VMS diesel generators, and two 3,000 shp electric motors, each driving a 7 ft, 3-bladed propeller at up to 400 rpm. Top speed was 17 kn when submerged, and 12 kn on the surface. Eight 21 in diameter torpedo tubes were fitted (six facing forward, two aft), with a total payload of 24 torpedoes. The boats were fitted with Type 186 and Type 187 sonars, and an I-band surface search radar. The standard complement was 68: 6 officers, 62 sailors. Odin was laid down by Cammell Laird on 27 April 1959, and launched on 4 November 1960. The boat was commissioned into the Royal Navy on 3 May 1962.

Decommissioning and fate

Odin was decommissioned on 18 October 1990. She was sold for scrap in Greece in October 1991.

Publications

This article is derived from Wikipedia and licensed under CC BY-SA 4.0. View the original article.

Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.
Bliptext is not affiliated with or endorsed by Wikipedia or the Wikimedia Foundation.

View original