In continuum mechanics, the Flamant solution provides expressions for the stresses and displacements in a linear elastic wedge loaded by point forces at its sharp end. This solution was developed by Alfred-Aimé Flamant in 1892 by modifying the three dimensional solutions for linear elasticity of Joseph Valentin Boussinesq. The stresses predicted by the Flamant solution are (in polar coordinates) where C_1, C_3 are constants that are determined from the boundary conditions and the geometry of the wedge (i.e., the angles ) and satisfy where F_1,F_2 are the applied forces. The wedge problem is self-similar and has no inherent length scale. Also, all quantities can be expressed in the separated-variable form. The stresses vary as (1/r).

Forces acting on a half-plane

For the special case where, \beta = 0, the wedge is converted into a half-plane with a normal force and a tangential force. In that case Therefore, the stresses are and the displacements are (using Michell's solution) The \ln r dependence of the displacements implies that the displacement grows the further one moves from the point of application of the force (and is unbounded at infinity). This feature of the Flamant solution is confusing and appears unphysical.

Displacements at the surface of the half-plane

The displacements in the x_1, x_2 directions at the surface of the half-plane are given by where \nu is the Poisson's ratio, \mu is the shear modulus, and

Derivation

If we assume the stresses to vary as (1/r), we can pick terms containing 1/r in the stresses from Michell's solution. Then the Airy stress function can be expressed as Therefore, from the tables in Michell's solution, we have The constants can then, in principle, be determined from the wedge geometry and the applied boundary conditions. However, the concentrated loads at the vertex are difficult to express in terms of traction boundary conditions because To get around this problem, we consider a bounded region of the wedge and consider equilibrium of the bounded wedge. Let the bounded wedge have two traction free surfaces and a third surface in the form of an arc of a circle with radius a,. Along the arc of the circle, the unit outward normal is where the basis vectors are. The tractions on the arc are Next, we examine the force and moment equilibrium in the bounded wedge and get We require that these equations be satisfied for all values of a, and thereby satisfy the boundary conditions. The traction-free boundary conditions on the edges and also imply that except at the point r = 0. If we assume that everywhere, then the traction-free conditions and the moment equilibrium equation are satisfied and we are left with and along except at the point r = 0. But the field everywhere also satisfies the force equilibrium equations. Hence this must be the solution. Also, the assumption implies that. Therefore, To find a particular solution for \sigma_{rr} we have to plug in the expression for \sigma_{rr} into the force equilibrium equations to get a system of two equations which have to be solved for C_1, C_3:

Forces acting on a half-plane

If we take and \beta = 0, the problem is converted into one where a normal force F_2 and a tangential force F_1 act on a half-plane. In that case, the force equilibrium equations take the form Therefore The stresses for this situation are Using the displacement tables from the Michell solution, the displacements for this case are given by

Displacements at the surface of the half-plane

To find expressions for the displacements at the surface of the half plane, we first find the displacements for positive x_1 (\theta=0) and negative x_1 keeping in mind that r = |x_1| along these locations. For \theta=0 we have For we have We can make the displacements symmetric around the point of application of the force by adding rigid body displacements (which does not affect the stresses) and removing the redundant rigid body displacements Then the displacements at the surface can be combined and take the form where