A Crampton locomotive is a type of steam locomotive designed by Thomas Russell Crampton and built by various firms from 1846. The main British builders were Tulk and Ley and Robert Stephenson and Company. Notable features were a low boiler and large driving wheels. The crux of the Crampton patent was that the single driving axle was placed behind the firebox, so that the driving wheels could be very large. This helped to give this design a low centre of gravity, so that it did not require a very broad-gauge track to travel safely at high speeds. Its wheel arrangement was usually or.

Design variations

Because the single driving axle was behind the firebox, Crampton locomotives usually had outside cylinders. However, some inside cylinder versions were built using indirect drive, then known as a jackshaft. The inside cylinders drove a crankshaft located in front of the firebox and the crankshaft was connected to the driving wheels by outside rods. Some long-wheelbase s were also built using this crankshaft system. The boiler feed-pump was often driven from the crankshaft as well because many Cramptons were built before the injector was invented. Another feature on some Crampton locomotives was the use of a boiler of oval cross-section, to lower the centre of gravity. It was later seen as a major flaw, because the internal pressure would tend to push the boiler into a circular cross-section and increase the risk of fatigue.

Usage

Crampton locomotives were used by some British railways and speeds of up to 120 km/h (75 mph) were achieved on the LNWR. They were more popular in France, southern Germany and the US. In France the expression "prendre la Crampton" meant to catch an express, and in the argot of the Saint Cyr military academy, footplate staff were known as "officiers de Crampton" (and this as late as 1971). One of the French examples has been preserved in the Cité du Train (the French Railway Museum) at Mulhouse and is still in working order. This is number 80 of the Chemin de Fer de l'Est, the Paris-Strasbourg line, which is named "Le Continent".

Locomotive list

The approximate numbers of Crampton-type locomotives built in Europe were:

Manufactured in Great Britain

Built by Tulk and Ley

All were of the wheel arrangement. Notes:

Built by Robert Stephenson and Company

Robert Stephenson and Company built a number of Crampton type locomotives for the South Eastern Railway and the London, Chatham and Dover Railway. These were all of wheel arrangement with inside cylinders and indirect drive. The inside cylinders drove a crankshaft located in front of the firebox and the crankshaft was coupled to the driving wheels by outside rods. Notes:

Built by Bury, Curtis, and Kennedy

All except Liverpool which was. Notes:

Built by E. B. Wilson and Company

Notes:

Built by R and W Hawthorn

Notes:

Other builders

Notes:

Manufactured in France

Notes:

Manufactured in Germany

Notes:

Sources