Buckhorn Reservoir

1

Buckhorn Reservoir is a reservoir in Wilson County, North Carolina, USA, created by the Buckhorn Dam. The reservoir is the primary water supply for the city of Wilson. The original Buckhorn Dam was built in 1974, 1000 ft upstream from the current dam. The reservoir at that time only had the ability to contain 800 e6USgal of water. In 1999, a new dam was constructed downstream from the older dam creating a reservoir with a much larger capacity. The new Buckhorn Reservoir covers an area of 2300 acre, and has a capacity of 7 e9USgal when fully filled. The dam is one-half mile long and was built with expansion in mind. The top of the dam was built to an elevation of 159 ft above sea level, although the lake is only filled to the 148 ft elevation. The dam is capable of holding another 6 ft of water, but that would require changes to the spillway design. A drought in 2007 caused the reservoir to drop to the 60% capacity level, which has raised the issue of increasing the capacity of the lake. The reservoir is primarily fed by two streams, Turkey Creek and Moccasin Creek, and to a lesser extent by Bull Branch, Little Creek, and Moccasin Creek. Water to be treated is not drawn from the reservoir itself. The outflow travels down Contentnea Creek to the Wiggins Mill reservoir, where the water is treated at the Wiggins Mill Water Treatment Plant.

This article is derived from Wikipedia and licensed under CC BY-SA 4.0. View the original article.

Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.
Bliptext is not affiliated with or endorsed by Wikipedia or the Wikimedia Foundation.

Edit article